Home Assistant Tuya Local component

Please report any issues and feel free to raise pull requests. Many others have contributed their help already.

This is a Home Assistant integration to support devices running Tuya firmware without going via the Tuya cloud. Devices are supported over WiFi, limited support for devices connected via hubs is available.

Note that many Tuya devices seem to support only one local connection. If you have connection issues when using this integration, ensure that other integrations offering local Tuya connections are not configured to use the same device, mobile applications on devices on the local network are closed, and no other software is trying to connect locally to your Tuya devices.

Using this integration does not stop your devices from sending status to the Tuya cloud, so this should not be seen as a security measure, rather it improves speed and reliability by using local connections, and may unlock some features of your device, or even unlock whole devices, that are not supported by the Tuya cloud API.

A similar but unrelated integration is rospogrigio/localtuya, if your device is not supported by this integration, you may find it easier to set up using that as an alternative.

Il y a de nombreuses façons de récupérer la téléinfo du compteur Edf, l’un des derniers modules en date est le Lixee mais il a le désavantage de n’être compatible qu’avec certains compteurs. Je vais te montrer comment faire remonter la téléinfo dans home assistant pour 20€ sans modules wifi esp32/8266, avec un micro module usb fabriqué par Charles Hallard le dernier en date est le micro téléinfo v3.0, nommé aussi µtéléinfo.

Les compteurs Linky disposent d'une prise de téléinformation appelée TIC permettant de récupérer sa consommation électrique dans Home Assistant. Cet article décrit comment construire pour une somme modique un module permettant de récupérer les informations du Linky, basé sur ESPHome et un ESP32.

MySensors is an open source hardware and software community focusing on do-it-yourself home automation and Internet of Things.

We're here to help people who'd like to create original and affordable sensors and actuators based on components like, Arduino, ESP8266, Raspberry Pi, NRF24L01+ and RFM69. Does it sound complicated? Don’t worry, we’ll explain everything.

We provide easy to follow build instructions, ready to use code examples and adaptable open source hardware designs. All of this runs on the MySensors software library for secure communication that has been battle-tested with more than 20 of the leading home automation controllers on the market.

So, join in, have fun and and create your own connected home experience!

My EcoWatt by RTE pour Home Assistant

REST API

Home Assistant provides a RESTful API on the same port as the web frontend. (default port is port 8123).

If you are not using the frontend in your setup then you need to add the api component to your configuration.yaml file.

http://IP_ADDRESS:8123/ is an interface to control Home Assistant.
http://IP_ADDRESS:8123/api/ is a RESTful API.

The API accepts and returns only JSON encoded objects.

All API calls have to be accompanied by the header Authorization: Bearer ABCDEFGH, where ABCDEFGH is replaced by your token. You can obtain a token ("Long-Lived Access Token") by logging into the frontend using a web browser, and going to your profile http://IP_ADDRESS:8123/profile.

The imap_email_content integration will read emails from an IMAP email server and report them as a state change within Home Assistant. This is useful if you have a device that only reports its state via email.

Setup e-mail tracking

Puis appuyer sur le bouton (sur le dessus du capteur) pendant 5 secondes. La led bleue se met à clignoter puis envoie les données

A ce jour, et d'après mes informations, la règle est que seule une société a la possibilité de demander un accès (gratuit pour l'instant) à l'API. Ca limite fortement nos habitudes de DIY !

Alors un développeur de la communauté (M4dm4rtig4n) a eu la riche idée, un projet personnel qui se sert de la façade légale de son employeur, de monter une passerelle d'accès : https://enedisgateway.tech. On lui fait confiance, il fera tout pour assurer la confidentialité des données, mais l'utilisation de cette passerelle sous entend de confier l'accès à vos données à cette société. Le risque est faible, les données peu sensibles, le jeton est révocable, et surtout rien ne vous force à utiliser cette passerelle qui pour l'instant est la seule solution fonctionnelle.

Bienvenue dans la nouvelle Communauté Francophone Home Assistant.

Cette communauté est la vôtre, et nous avons besoin de vous pour la faire grandir et devenir LA Communauté Francophone pour les débutants comme les plus expérimentés.

Home Assistant Community Store

HACS gives you a powerful UI to handle downloads of all your custom needs.

slider-entity-row

Add a slider to rows in lovelace entities cards.

For installation instructions see this guide.

Install slider-entity-row.js as a module.

resources:

• url: /local/slider-entity-row.js
  type: module

Usage

Add this to an entities card:

type: entities
entities:

• light.bed_light
• type: custom:slider-entity-row
  entity: light.kitchen_lights

Hello In HA, Profalux covers appear as a switch and not as a cover. I use Pi-Zigate, documentation and compatibility are describe here (but in french): Zigate : https://zigate.fr/ Motor : https://z...

ZHA Device Handlers For Home Assistant

ZHA Device Handlers are custom quirks implementations for Zigpy, the library that provides the Zigbee support for the ZHA component in Home Assistant.

ZiGate component for Home Assistant

Instructions on how to integrate your Zigbee Home Automation (ZHA) devices within Home Assistant.

ESPHome is a system to control your ESP8266/ESP32 by simple yet powerful configuration files and control them remotely through Home Automation systems.

Recent versions of Home Assistant with ZHA can do over the air (OTA) updates of your zigbee IKEA and LEDVANCE devices.

Other manufactures could be supported too if they published their firmwares publically!

I do know, specifically for IKEA, recent firmware updates have greatly improved their stability and performance.